Loading gallery...
Odd One Out โ The Black Sheep Card Game ๐๐ค
Fifteen dressed-up sheep pairs and one black sheep nobody wants to be left holding โ the classic Old Maid game, reimagined with a whole lot of wool. Print the deck and its cozy card holder, and game night fits in your pocket.
๐ Why You'll Love It:
๐ Quick Specs: 31 cards (15 sheep pairs + 1 black sheep) - print-in-place card holder - flow test included
๐ Also known as: Old Maid โข Schwarzer Peter โข Black Peter โข Le Pouilleux
Estimated Print Time & Material Usage (Bambu Lab A1):
Approximate โ varies by printer and slicer settings.
๐ Print Settings: See included README.md for detailed instructions
Not all filaments are equal. The included card file prints at 1.20 initial layer flow and 1.20 top layer flow, which suits most of them โ but we want you to get the best possible result. This short test tunes the flow to the filaments you actually use. Open 92_optional_card-flow-test-1.00-1.40.3mf in Bambu Studio and print it as it is. Load the four filaments in AMS slots 1โ4: 1 Black, 2 White, 3 Skin, 4 Blue. Use the smooth PEI plate. About 1ยพ h and 11 g.
Let the plate cool, take the tiles off and turn them over. Look at them in light from the side. Gaps: thin lines with gaps and a torn outline around the spade and heart โ too little. Squished: lines pushed into waves โ too much. Pick the best tile in each row. A second example. Every filament is different โ that is why each colour gets its own row.
Now the side facing up. Gaps: fine lines you can see between โ too little. Ridges: raised lines and rough patches, often at the end of the tile โ too much. Pick the best tile in each row. A second example. Two tiles look good here, so the best value is the one in between.
Note the number printed on the best tile. Ignore how the number itself on the bottom of every tile looks โ small text always looks a bit rough; judge only the big flat surface and the spade and heart. If two tiles look equally good, take the value in between, like 1.15.
Go to cards.lehadesign.club on a computer and click Open a project file (.leha). Choose 93_OddOneOut_V8_final_default.leha from the download. The whole deck opens, and it saves itself in your browser.
Nothing to change on Fronts and Back. Click Print in the step bar.
In Filaments ยท whole deck, type your B value under 1st layer flow (B) and your T value under Top layer flow (T) for all the colors. For the very best result, tune the green, brown and red filaments as well (or use the default 1.20).
Scroll down to Cards per plate and pick As many as fit: the deck prints on 5 plates. Then click Download 3MF ยท whole deck. Every card takes a few seconds to work out. Open the new file in Bambu Studio and print each plate, loading the filaments shown for its AMS slots. Every colour now prints with your own flow.
Filaments and hardware picked to print this model well
* Contains affiliate links
This model is restricted by licensing terms. View license